{"title":"Battery Charge Controllers","description":null,"products":[{"product_id":"jaac0039338","title":"Victron Energy Blue-Solar PWM-LCD\u0026USB Charge Controller PWM 12 V, 24 V 10 A (SCC010010050)","description":"Victron BlueSolar PWM Charge Controller with LCD and USB 12\/14 10A The BlueSolar Charge Controller uses Pulse Width Modulation (PWM) charge voltage control with a programable charge control algorithm. This BlueSolar controller is a simple and cost effective way to add a solar panel to your current system. Although it does not have the same features as the SmartSolar range it will provide the connectivity and control required to create a solar power\/battery storage system. Features Liquid Crystal Display Two 5 Volt USB outputs Lighting control function, fully programmable Three stage battery charging (bulk, absorption, float), fully programmable Load output with low voltage and manual disconnect (programmable) Load output protected against over load and short circuit Protected against reverse polarity connection of the solar panels and\/or battery Prevent Battery Over-Discharge Load output over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage. Some loads (especially inverters) can best be connected directly to the battery, and the inverter remote control connected to the load output. A special interface cable may be needed, please see the manual. The connect and disconnect voltages are adjustable.","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":51689562571091,"sku":"JAAC0039338","price":99.52,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/2294\/9203\/files\/8719076046189_image_1_min500.jpg?v=1778707973"},{"product_id":"jaac0039339","title":"Victron Energy Blue-Solar PWM-LCD\u0026USB Charge Controller PWM 12 V, 24 V 20 A (SCC010020050)","description":"Victron BlueSolar PWM Charge Controller with LCD and USB 12\/14 20A The BlueSolar Charge Controller uses Pulse Width Modulation (PWM) charge voltage control with a programable charge control algorithm. This BlueSolar controller is a simple and cost effective way to add a solar panel to your current system. Although it does not have the same features as the SmartSolar range it will provide the connectivity and control required to create a solar power\/battery storage system. Features Liquid Crystal Display Two 5 Volt USB outputs Lighting control function, fully programmable Three stage battery charging (bulk, absorption, float), fully programmable Load output with low voltage and manual disconnect (programmable) Load output protected against over load and short circuit Protected against reverse polarity connection of the solar panels and\/or battery Prevent Battery Over-Discharge Load output over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage. Some loads (especially inverters) can best be connected directly to the battery, and the inverter remote control connected to the load output. A special interface cable may be needed, please see the manual. The connect and disconnect voltages are adjustable.","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":51689562603859,"sku":"JAAC0039339","price":98.4,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/2294\/9203\/files\/8719076046202_image_1_min500.jpg?v=1778707980"},{"product_id":"jaac0039340","title":"Victron Energy Blue-Solar PWM-LCD\u0026USB Charge Controller PWM 12 V, 24 V 30 A (SCC010030050)","description":"Victron Blue Solar PWM Charge Controller with LCD and USB 12\/14 30A The BlueSolar Charge Controller uses Pulse Width Modulation (PWM) charge voltage control with a programable charge control algorithm. This BlueSolar controller is a simple and cost effective way to add a solar panel to your current system. Although it does not have the same features as the SmartSolar range it will provide the connectivity and control required to create a solar power\/battery storage system. Features Liquid Crystal Display Two 5 Volt USB outputs Lighting control function, fully programmable Three stage battery charging (bulk, absorption, float), fully programmable Load output with low voltage and manual disconnect (programmable) Load output protected against over load and short circuit Protected against reverse polarity connection of the solar panels and\/or battery Prevent Battery Over-Discharge Load output over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage. Some loads (especially inverters) can best be connected directly to the battery, and the inverter remote control connected to the load output. A special interface cable may be needed, please see the manual. The connect and disconnect voltages are adjustable.","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":51689562669395,"sku":"JAAC0039340","price":82.83,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/2294\/9203\/files\/File_585aa5f8-ca8c-4457-810d-1a77ca507ada.jpg?v=1762370961"},{"product_id":"jaac0039341","title":"Victron Energy Chargers MPPT 12 V, 24 V 15 A (SCC075015060R)","description":"Victron Solar Charge Controller Genuine VictronEnergy MPPT Energy SmartSolar solar charge controller with 75volt 15amp Intelligent Load Output VE-Direct Port Maximum Open Circuit 75 volts Maximum Charge Current 15 amps Strong, Durable Construction.","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":51689562767699,"sku":"JAAC0039341","price":103.51,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/2294\/9203\/files\/File_aafef68a-8791-4243-ad0e-6c1bbcfa097f.jpg?v=1762370964"},{"product_id":"ac0039350","title":"Victron Energy SCC010015050R MPPT Charge Controller 12V, 24V 15A","description":"BlueSolar MPPT 75\/15 Retail - A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, BlueSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. BlueSolar maintains battery health, extending its life. By constantly monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage. The advantage of this is most noticeable when the sky is partially clouded, and light intensity is constantly changing. Remotely control and monitor the extensive features of your BlueSolar MPPT charger by attaching a bluetooth dongle and pairing it with your smartphone or other device via VictronConnect. If your installation is connected to the internet Victron Remote Management Portal (VRM) provides access to the full power of your MPPT, anytime, anywhere; both services are free to use. For remote installations - even when there is no internet connection or phone signal nearby - you may be able to monitor your MPPT by bluetooth-pairing with a LoRaWAN (long-range wide area network) device, available optionally. The intelligent Load output function prevents damage caused by running batteries 'flat'. You can configure the voltage at which BlueSolar disconnects a load - thereby preventing excessive drain on your batteries. And here's the clever bit: BlueSolar will attempt a 100% recharge every day. If it can't - during periods of poor weather - it raises the disconnect voltage, daily, until it achieves success. We call this feature BatteryLife because it maintains the health, and extends the life of your battery.","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":51689563193683,"sku":"AC0039350","price":74.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/2294\/9203\/files\/File_ba942b67-7907-42e2-8a5f-73c1e01bba4d.jpg?v=1762109328"},{"product_id":"ja0074368","title":"Solar Charging Controller 12\/24 V\/4 A (200013)","description":"Compact and powerful. Reliable charge controller for solar systems up to 4 A. A simple and extremely reliable device for charging lead-acid and lead-gel batteries in smaller solar systems. It charges the battery using the PWM charging method. When the final charging voltage is reached, the charging current is switched off, thus protecting the connected battery from overcharging. With low power consumption, this solar charge controller is extremely economical. Two LEDs indicate whether the battery is full or still charging. The PWM charging method initially charges the battery at maximum current. As soon as the respective final charging voltage is reached, the current flow is stopped, preventing overcharging. After this initial charging step, the battery is usually not yet fully charged. A drop in battery voltage is to be expected. Therefore, the charging current resumes when a defined voltage level is undershot. This process repeats until the battery is fully charged.","brand":"IVT","offers":[{"title":"Default Title","offer_id":51702548660563,"sku":"JA0074368","price":70.77,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/2294\/9203\/files\/4030072200134_image_1_min500.jpg?v=1778723666"},{"product_id":"ja0103778","title":"Ivt Solar Charging Controller 12\/24 V\/20 A","description":"This pulse-width modulated shunt solar charge controller is ideally suited for small and medium-sized photovoltaic systems. The temperature sensor ensures optimal adjustment of the charging cut-off voltage and the gassing cut-off voltage to the ambient temperature of the battery.","brand":"IVT","offers":[{"title":"Default Title","offer_id":51705296159059,"sku":"JA0103778","price":95.61,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/2294\/9203\/files\/4030072200028_image_1_min500.jpg?v=1778758067"},{"product_id":"jaac0006721","title":"Victron Energy Smart BatteryProtect 12\/24V 65A BPR065022000","description":"Smart BatteryProtect 24\/12 from Victron Energy The Smart BatteryProtect disconnects the battery from non-essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine. When using Bluetooth to program the Smart BatteryProtect any required engage\/disengage levels can be set. Alternatively, one of nine predefined engage\/disengage levels can be set with the programming pin (see manual). If required, Bluetooth can be disabled. The Smart BatteryProtect is a uni-directional device. It can only deal with current in one direction, so either current to a load, or current from a charger, but not both currents at the same time. In addition to this, current only can only flow from the IN terminal to the OUT terminal. In case of use with a load, the battery connects to the IN terminal, and in case of use with a charger, the charger connects to the IN terminal.","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":51711351554387,"sku":"JAAC0006721","price":93.17,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/2294\/9203\/files\/File_83a1e892-3a15-46d3-b768-e38f18f0aa28.jpg?v=1762369094"},{"product_id":"ja0129378","title":"IVT Solar Charge Controller - 12 V, 24 V 25 A - SCDplus 25A - 200042","description":"High-quality solar charge controller with integrated USB interface. Precise and gentle charging of common solar battery types is guaranteed thanks to the four different charging programs. Comprehensive protection measures against reverse polarity, overvoltage, and overload ensure safe operation of the solar charge controller. The integrated overcharge and deep discharge protection support the longevity of the connected solar battery. Additionally, you can use the USB interface to establish a connection between the solar controller and a PC, allowing you to program user-specific charging processes. The two integrated LEDs indicate the current charging stage, warn of deep discharge, and show the status of the load output. Charging process: Depending on the defined battery type and its final charging voltage, charging takes place in a maximum of three stages. In charging stage 1, charging occurs at maximum current until the corresponding final charging voltage is reached. The device then charges for a fixed period of time at charging stage 1 and then switches to stage 2. Here, the charging current is limited using pulse width modulation (PWM). A user-defined charging profile can also enable charging stage 3. If the discharge lasts for more than 30 minutes, the device returns to charging mode 1. Deep discharge protection: To protect the battery from irreparable damage during deep discharge, the device activates when the minimum discharge level is reached.","brand":"IVT","offers":[{"title":"Default Title","offer_id":51711458705747,"sku":"JA0129378","price":167.65,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/2294\/9203\/files\/4030072200424_image_1_min500.jpg?v=1778773673"},{"product_id":"ja0130170","title":"IVT Solar Charge Controller 12V\/24V 15A - SCDplus 15A","description":"High-quality solar charge controller with integrated USB interface. Precise and gentle charging of common solar battery types is guaranteed thanks to the four different charging programs. Comprehensive protection measures against reverse polarity, overvoltage, and overload ensure safe operation of the solar charge controller. The integrated overcharge and deep discharge protection support the longevity of the connected solar battery. Additionally, you can use the USB interface to establish a connection between the solar controller and a PC, allowing you to program user-specific charging processes. The two integrated LEDs indicate the current charging stage, warn of deep discharge, and show the status of the load output. Charging process: Depending on the defined battery type and its final charging voltage, charging takes place in a maximum of three stages. In charging stage 1, charging occurs at maximum current until the corresponding final charging voltage is reached. The device then charges for a fixed period of time at charging stage 1 and then switches to stage 2. Here, the charging current is limited using pulse width modulation (PWM). A user-defined charging profile can also enable charging stage 3. If the discharge lasts for more than 30 minutes, the device returns to charging mode 1. Deep discharge protection: To protect the battery from irreparable damage during deep discharge, the device activates when the minimum discharge level is reached.","brand":"IVT","offers":[{"title":"Default Title","offer_id":51711935676755,"sku":"JA0130170","price":214.63,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/2294\/9203\/files\/14332b7c472c2e978bcfc8bcc384a93ece2a96fb3369bdd415709218013f5ca4_afe94fec-bf21-40f8-ac0a-aeb941343870.jpg?v=1762315425"},{"product_id":"ja0177647","title":"Ivt MPPT Solar Charge Controller 30A - Maximum Power Point Tracker (18319)","description":"MPPT (Maximum Power Point Tracker) ensures optimal utilization of the solar power from your solar panels. The most efficient operating point of the solar panels changes due to various factors, such as panel temperature, irradiance, panel type, etc. This operating point is constantly monitored by the internal microcontroller and adjusted as needed to ensure optimal panel output and charging of your batteries with the highest possible current.","brand":"IVT","offers":[{"title":"Default Title","offer_id":52212357955923,"sku":"JA0177647","price":214.63,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/2294\/9203\/files\/4016138451399_image_1_min500.jpg?v=1778790669"},{"product_id":"ja0184435","title":"DIMPLEX ZWU 06E Universal AC\/DC Charging Controller (379030)","description":"Universal AC\/DC charging controller ZWU 06E with timer function. Universal AC and DC microcomputer charging controller with timer function for reverse, spread and forward control as well as any release models through intelligent control of the charging quantity, two control voltage outputs DC 0.91 to 1.43 V or DC -3.6 to -2.85 V and AC 230 V\/ ED (% ED variably adjustable), backlit display with touch function, service functions, support for the most common outdoor temperature sensors, characteristic curve switching: 4 operating modes for weekly program and absence, 12 h power reserve in case of power interruption, DIN rail mounting - 3 modules, IP 20 protection class standard with appropriate mounting, NTC standard outdoor sensor included (connection cable 3 m). With sensor, weather-dependent control, adjustable reduced charging, application: heat storage, display type: LCD, design: central control, weather-dependent control: yes, ED- - building technology, heat storage, heat storage - Dimplex Universal AC\/DC- ZWU 06E charging control with time function 379030.","brand":"DIMPLEX","offers":[{"title":"Default Title","offer_id":52247375020371,"sku":"JA0184435","price":633.47,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/2294\/9203\/files\/4015627379039_image_1_min500.jpg?v=1778793332"},{"product_id":"58873","title":"Victron Energy Smart BatteryProtect 12\/24V 100A","description":"Smart BatteryProtect 100amp 12v and 24v Lithium Battery Protection The Smart BatteryProtect disconnects the battery from non-essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine. When using Bluetooth to program the Smart BatteryProtect any required engage\/disengage levels can be set. Alternatively, one of nine predefined engage or disengage levels can be set with the programming pin (see manual under Downloads - Cross Reference above). If required, Bluetooth can be disabled. The Smart BatteryProtect is a uni-directional device. It can only deal with current in one direction, so either current to a load, or current from a charger, but not both currents at the same time. In addition to this, current only can only flow from the IN terminal to the OUT terminal. In case of use with a load, the battery connects to the IN terminal, and in case of use with a charger, the charger connects to the IN terminal.","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":53046145778003,"sku":"AC0006734","price":98.43,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/2294\/9203\/files\/File_96c28ff1-437d-4b6d-adcc-9389ecca9008.jpg?v=1771280965"},{"product_id":"22415","title":"IVT Solar Charging Controller 12\/24 V 8 A","description":"IVT Smart Living Charge controller 633657 - IVT 200001, The IVT Shunt Charge Controller PWM 12 V\/24 V 8 A is a solar charge regulator designed for managing solar power systems with nominal voltages of 12 or 24 volts. It is ideal for maintaining battery charge, ensuring efficient energy flow in solar and wind power applications. The compact unit measures 95x95x35 mm and operates effectively in temperatures between -25 and +50 degrees Celsius. IVT 200001 Shunt Charge Controller PWM 12\/24V 8A Easy Charging.","brand":"IVT","offers":[{"title":"Default Title","offer_id":53061372477779,"sku":"JA0217294","price":78.34,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/2294\/9203\/files\/4030072200011_image_1_min500.jpg?v=1778806488"},{"product_id":"3914","title":"Qoltec Solar Charge Controller MPPT with Temperature Sensor - Advanced Energy Management","description":"The Qoltec MPPT solar charge controller with temperature sensor is an advanced solution for managing the energy of photovoltaic systems. Using Maximum Power Point Tracking (MPPT) technology, this controller optimizes energy efficiency by continuously adjusting the voltage and current of the solar panels. This allows for maximum use of solar energy, even in challenging conditions such as partial shading or fluctuating solar intensity. The controller is particularly suitable for use on boats and RVs, where it provides a reliable power source while protecting against overloads, overheating, and incorrect connections. The intuitive interface allows for easy adjustment of settings, while remote monitoring via mobile apps offers additional convenience. - MPPT technology for maximum energy efficiency - Protection functions against overload, overheating, and short circuits - Intuitive interface for easy use - Suitable for use on boats and RVs - Remote monitoring via mobile apps.","brand":"Qoltec","offers":[{"title":"Default Title","offer_id":53190787203411,"sku":"AC0039335","price":114.32,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/2294\/9203\/files\/File_ac781a2e-815f-4d22-aa65-9faa1582a19a.jpg?v=1772864531"},{"product_id":"4190-1","title":"Solar Charger MPPT 60A with Temperature Sensor","description":"Description\nThe Générique MPPT Solar Charge Controller 60A with Temperature Sensor integrates maximum power point tracking (MPPT) technology to optimize energy conversion from solar panels. It supplies up to 60 A of charging current and adjusts parameters based on battery temperature using its integrated sensor. The compact controller is designed for easy integration into solar energy systems.\n\nKey Features\n- MPPT charging technology\n- 60 A maximum charging current\n- Integrated temperature sensor\n\nSpecifications\nBrand: Générique\nProduct Type: MPPT solar charge controller\nCharging Current (A): 60","brand":"Qoltec","offers":[{"title":"Default Title","offer_id":53197969850707,"sku":"AC0080100","price":130.66,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/2294\/9203\/files\/File_911f8dbe-853d-4d0a-80f8-fa00ff6c51d8.jpg?v=1772966810"},{"product_id":"4226","title":"Qoltec Solar MPPT Charge Controller 20A 12V\/24V LCD 2 x USB","description":"The Qoltec MPPT solar charge controller is a powerful device designed for the efficient use of solar energy. With a nominal voltage of 24 volts and a nominal current of 20 amps, this controller allows for an output power of up to 520 watts. It is suitable for both 12V and 24V systems and features a digital LCD display for easy monitoring of operating parameters. The integrated temperature sensor ensures optimized charging efficiency under various conditions. With two USB ports, the controller can also directly charge mobile devices. Its compact design, measuring 125 mm wide, 48 mm high, and 177 mm long, and weighing 554 grams, makes it a practical solution for a variety of applications. The IP30 rating ensures the device is protected from dust and contact, increasing its durability and reliability. The MPPT solar charge controller is therefore an ideal choice for those seeking a sustainable energy source.","brand":"Qoltec","offers":[{"title":"Default Title","offer_id":53230649934163,"sku":"AC0039334","price":66.7,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/2294\/9203\/files\/File_8c8c4fbd-d799-44f1-8cc5-eb6fcf220ade.jpg?v=1773303496"},{"product_id":"63288-1","title":"Victron Energy Smart BatteryProtect 12\/24V 220A BPR122022000","description":"Smart BatteryProtect 220amp 24\/12 from Victron Energy The Smart BatteryProtect disconnects the battery from non-essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine. When using Bluetooth to program the Smart BatteryProtect any required engage\/disengage levels can be set. Alternatively, one of nine predefined engage\/disengage levels can be set with the programming pin (see manual). If required, Bluetooth can be disabled. The Smart BatteryProtect is a uni-directional device. It can only deal with current in one direction, so either current to a load, or current from a charger, but not both currents at the same time. In addition to this, current only can only flow from the IN terminal to the OUT terminal. In case of use with a load, the battery connects to the IN terminal, and in case of use with a charger, the charger connects to the IN terminal.","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":53230796439891,"sku":"AC0006702","price":135.92,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/2294\/9203\/files\/File_be06d348-0293-48f5-a7db-09de7f8f0597.jpg?v=1773306335"},{"product_id":"2678","title":"Victron Energy Battery Balancer","description":"Battery Balancer The Battery Balancer equalizes the state of charge of two series connected 12V batteries or of several parallel strings of series connected batteries. When the charge voltage of a 24V battery system increases to more than 27V the Battery Balancer will turn on and compare the voltage over the two series connected batteries. The Battery Balancer will draw a current of up to 1A from the battery (or parallel connected batteries) with the highest voltage. The resulting charge current differential will ensure that all batteries will converge to the same state of charge. If needed several balancers can be paralleled. A 48V battery bank can be balanced with three Battery Balancers. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.Please contact your dealer for any returns repairs or support issues related to this product. Specifications: Box Dimensions: 3 H x 6 W x 6 L WT: 0.65 lbs UPC: 8719076020950 Quick Guide (pdf) Brochure (pdf).","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":53297837900115,"sku":"AC0006712","price":75.45,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/2294\/9203\/files\/File_f12b2c01-4dba-44d0-9cff-abada896eca4.jpg?v=1773990813"},{"product_id":"2841-1","title":"Victron Energy Blue Smart IP65 Lead-Acid Battery Charger, 12V 4A (BPC120433064R)","description":"Water, dust and chemical resistantSeven step smart charge algorithmRecovery of fully discharged dead batteriesAutomatic power supply functionSevere cold performance: down to -30 CSeveral other battery life enhancing featuresLow power mode to charge smaller batteriesLi-ion battery modeSetup and configure, readout of voltage and currentby Bluetooth SmartUltra high efficiency green battery chargerWith up to 95 % efficiency, these chargers generate up to four times less heat when compared to the industry standard. And once the battery is fully charged, power consumption reduces to 0,5 Watt, some five to ten times better than the industry standard.Durable, safe and silent- Low thermal stress on the electronic components.- Protection against ingress of dust, water and chemicals.- Protection against overheating: the output current will reduce as temperature increases up to 60C, but the charger will not fail.- The chargers are totally silent: no cooling fan or any other moving parts.ReconditioningA lead-acid battery that has been insufficiently charged or has been left discharged during days or weeks will deteriorate due to sulfation. If caught in time, sulfation can sometimes be partially reversed by charging the battery with low current up to a higher voltage.Recovery function for fully discharged batteriesMost reverse polarity protected chargers will not recognize, and therefore not recharge a battery which has been discharged to zero or nearly zero Volts. The Blue Smart IP65 Charger however will attempt to recharge a fully discharged battery with low current and resume normal charging once sufficient voltage has developed across the battery terminals.The VictronConnect app Setup, readout and configure your Blue Smart IP65Charger via your smartphone. You can display the status of your charger andbattery and even control the functions of your charger using the VictronConnect app. On your screen the readout of voltage and current is default available.Storage mode: less corrosion of the positive platesEven the lower float charge voltage that follows the absorption period will cause grid corrosion. It is therefore essential to reduce the charge voltage even further when the battery remains connected to the charger during more than 48 hours. Made in: NetherlandsCapacity: 20 - 40 AhUK\/EU Power supply included: YesCurrent (A): 4.0Weight: 0,9 kgWidth: 95 mmLength: 190 mmCurrent: 4 APower Supply: 230VHeight: 47 mmType of Product: Chargerype: ChargerVoltage: 12 V.","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":53297838293331,"sku":"JAAC0007211","price":114.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/2294\/9203\/files\/8719076044611_image_1_min500.jpg?v=1778825423"},{"product_id":"4665-1","title":"EPEVER MPPT TRACER 5420AN 50A Charge Controller - Efficient Solar Management","description":"The EPEVER MPPT TRACER 5420AN 50A is a highly developed charge controller designed for efficient use of solar energy. With a maximum charging power of 50 amps, this controller enables optimal energy conversion and distribution, extending battery life and maximizing performance. The MPPT (Maximum Power Point Tracking) algorithm ensures that solar panels always operate in the optimal power range, resulting in greater energy yield. The controller is suitable for a variety of applications, whether in campers, boats, or fixed solar systems. During installation, safety measures must be followed to avoid contact with electricity. Furthermore, the controller must be protected from direct humidity and extreme temperatures to ensure proper operation. It is important to keep the device out of reach of children to minimize safety risks. The EPEVER MPPT TRACER 5420AN 50A is therefore a reliable choice for those seeking a sustainable and efficient energy source.","brand":"EPEVER","offers":[{"title":"Default Title","offer_id":53297839145299,"sku":"AC0039343","price":287.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/2294\/9203\/files\/File_668e1895-fe90-44e7-ac03-c474b72a7335.jpg?v=1773990913"},{"product_id":"4668-3","title":"EPEVER MPPT Tracer 8420AN 80A Charge Controller","description":"Description\nThe Generic EPEVER MPPT Tracer 8420AN is a solar charge controller that implements maximum power point tracking technology to optimize photovoltaic energy yield. It supports up to 80 A of charging current under model number Tracer 8420AN. The unit is engineered for integration into off-grid solar systems for improved battery charging performance. Its design facilitates efficient power management in standalone PV setups.\n\nKey Features\n- MPPT solar charge controller\n- 80 A charging current\n- Model Tracer 8420AN\n\nSpecifications\nBrand: Generic\nModel Number: Tracer 8420AN\nProduct Type: Solar charge controller\nCharging Current (A): 80","brand":"EPEVER","offers":[{"title":"Default Title","offer_id":53297839210835,"sku":"AC0039347","price":676.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/2294\/9203\/files\/File_7ca025f4-e193-4dbf-8743-e8311716ddca.jpg?v=1773990919"},{"product_id":"4669-2","title":"SmartSolar MPPT 75\/10 Charge Controller","description":"SmartSolar Charge Controller MPPT 75volt\/10amp The Victron SmartSolar Controller gathers energy from your panels to store in your battery bank. Using the latest technology, SmartSolar maximises this energy, monitoring to achieve full charge in the shortest period, whilst protecting battery life and health. The SmartSolar charge controller will recharge a severely depleted battery with a voltage as low as 0 Volts, provided the cells are not permanently damaged Smart Bluetooth Connectivity with Victron Connect App Ultra-fast Maximum Power Point Tracking (MPPT) Programable Charge Profiles Load output - perfect for LED lighting Automatic Voltage Detection 75volt Maximum Open Circuit Voltage 10amp Maximum Charge Current MPPT: Ultra Fast Maximum Power Point Tracking By real time monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that every last amp of available power is used from your panels, and diverted for storage. The advantage of this is most noticeable when the sky cloudy, and light intensity is changing. Remote Monitoring and Control You can control and check your SmartSolar MPPT charger from anywhere by connecting it to your smartphone or another device using the VictronConnect App. If your setup is connected to the internet through a Cerbo GX device, you can use the Victron Remote Management Portal (VRM) to access your MPPT charger from anywhere in the world. Both VictronConnect and VRM are free to use. If you don't have an internet connection nearby, you can possibly monitor your MPPT charger by connecting the GlobalLink 520. Load output The intelligent Load output function prevents running batteries 'flat'. You can configure the voltage at which SmartSolar disconnects a load preventing excessive drain on your battery. The intelligent SmartSolar will attempt a 100% recharge every day. If it can't - during periods of poor conditions - it raises the disconnect voltage, daily, until it achieves a full charge. We call this feature BatteryLife because it maintains the health and longevity. If you are unsure of which charge controller is best for your system contact the Butler Technik support team for professional advice.","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":53297839341907,"sku":"AC0039346","price":99.81,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/2294\/9203\/files\/8719076040798_image_1_min500.jpg?v=1778825428"},{"product_id":"4671-1","title":"EPEVER MPPT Tracer 10420AN 100A Charge Controller","description":"Description\nThe Generic EPEVER MPPT Tracer 10420AN is a solar charge controller featuring maximum power point tracking to enhance photovoltaic efficiency. It provides up to 100 A of charging current and operates under model number Tracer 10420AN. Designed for off-grid installations, it optimizes battery charging from solar panels. The controller’s compact form suits various standalone PV systems.\n\nKey Features\n- MPPT solar charge controller\n- 100 A charging current\n- Model Tracer 10420AN\n\nSpecifications\nBrand: Generic\nModel Number: Tracer 10420AN\nProduct Type: Solar charge controller\nCharging Current (A): 100","brand":"EPEE","offers":[{"title":"Default Title","offer_id":53297839472979,"sku":"AC0039351","price":544.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/2294\/9203\/files\/File_83c67c68-a685-4575-ba7e-e9585f883fd0.jpg?v=1773990936"},{"product_id":"4673-1","title":"SmartSolar MPPT 100\/15 Charge Controller","description":"SmartSolar MPPT 100\/15 Retail - A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life. The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged. By constantly monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage. The advantage of this is most noticeable when the sky is partially clouded, and light intensity is constantly changing. Remotely control and monitor the extensive features of your SmartSolar MPPT charger with built-in Bluetooth by pairing it with your smartphone or other device via VictronConnect. If your installation is connected to the internet Victron Remote Management Portal (VRM) provides access to the full power of your MPPT, anytime, anywhere; both services are free to use. For remote installations - even when there is no internet connection or phone signal nearby - you may be able to monitor and control your MPPT by connecting the GlobalLink 520. The intelligent Load output function prevents damage caused by running batteries 'flat'. You can configure the voltage at which SmartSolar disconnects a load - thereby preventing excessive drain on your batteries. And here's the clever bit: SmartSolar will attempt a 100% recharge every day. If it can't - during periods of poor weather - it raises the disconnect voltage, daily, until it achieves success. We call this feature BatteryLife because it maintains the health, and extends the life of your battery.","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":53297839538515,"sku":"AC0039345","price":119.28,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/2294\/9203\/files\/8719076040811_image_1_min500.jpg?v=1778825426"},{"product_id":"5545-2","title":"Qoltec MPPT Solar Charge Controller with Temperature Sensor 80A","description":"Description\nThe QOLTEC MPPT Solar Charge Controller with an 80 A rating is designed for 12 V, 24 V, or 36 V solar arrays. It employs maximum power point tracking technology to maximize energy harvest and includes a temperature sensor for compensation of charging voltage. The unit supports both GEL lead-acid and LiFePO4 battery chemistries, offering flexible integration across off-grid power systems. Its robust design manages high current loads in demanding solar installations.\n\nKey Features\n- 80 A charging current\n- MPPT solar charge controller\n- 12 V\/24 V\/36 V compatibility\n- Built-in temperature sensor\n- GEL and LiFePO4 battery support\n\nSpecifications\nBrand: QOLTEC\nProduct Type: solar charge controller\nCharging Current (A): 80\nCompatibility: 12V\/24V\/36V\nBattery Technology: LiFePO4\nMppt: true\nTemperature Sensor Included: true\nBattery Types Supported: GEL, LiFePO4","brand":"Qoltec","offers":[{"title":"Default Title","offer_id":53465292210515,"sku":"AC0085078","price":162.91,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/2294\/9203\/files\/File_e052d2c5-a028-4f61-a527-150f99b731ed.jpg?v=1776042208"},{"product_id":"5548-2","title":"Qoltec MPPT Solar Charge Controller with Temperature Sensor 10A","description":"Description\nThe QOLTEC MPPT Solar Charge Controller features a maximum charging current of 10 A and supports a 12 V photovoltaic system. It integrates maximum power point tracking technology to optimize solar panel output and includes a built-in temperature sensor to adjust charging parameters based on ambient conditions. This controller is specifically compatible with LiFePO4 battery chemistry and monitors system status through its clear interface. Its compact design allows for straightforward installation in renewable energy setups.\n\nKey Features\n- 10 A charging current\n- MPPT solar charge controller\n- Built-in temperature sensor\n- 12 V system compatibility\n- LiFePO4 battery support\n\nSpecifications\nBrand: QOLTEC\nProduct Type: solar charge controller\nVoltage (V): 12\nCharging Current (A): 10\nBattery Technology: LiFePO4\nMppt: true\nTemperature Sensor Included: true","brand":"Qoltec","offers":[{"title":"Default Title","offer_id":53465292407123,"sku":"AC0085079","price":77.58,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/2294\/9203\/files\/File_18eadde7-0c91-439a-9011-4f3b9babd363.jpg?v=1776042212"},{"product_id":"5563-2","title":"Victron Energy SmartSolar MPPT 250\/100 VE.Can 250V Charger","description":"SmartSolar MPPT VE CAN 250V-100A with VE.CAN Port The MPPT VE.Can SmartSolar charger uses the latest and fastest technology to convert energy from a solar array into energy that optimally charges battery banks. The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts provided the cells are not permanently sulfated or otherwise damaged. MPPT: Ultra Fast Maximum Power Point Tracking The MPPT VE.Can SmartSolar charger connects to a PV array of 150 or 250 Volt Voc and will automatically detect and charge your 12 24 or 48V battery bank with current ranging from 70 to 100A depending on the model. The charge settings are fully programmable and can even be set up for different battery chemistries like lead-acid lithium and others. Control Your Charger Remotely The MPPT VE.Can SmartSolar charger can be remotely controlled and configured over Bluetooth via the VictronConnect App. This allows device set-up management and at-a-glance information such as battery voltage and current PV voltage and current and historical data. Daisy Chain Additional Units The VE.Can SmartSolar charger is equipped with CAN bus ports. This allows for communication with additional VE.Can SmartSolar chargers. The additional units are simply daisy-chained to each other with a single RJ45 cable between the individual units. When connected to each other all individual VE.Can SmartSolar chargers will synchronize their charge stages. They can also send their data via a single cable to a GX monitoring device. Remote Monitoring and Control If the GX device is connected to the internet the Victron Remote Management Portal (VRM) provides access to the full power of your solar charger(s). For remote installations - even when there is no internet connection nearby - you may be able to monitor your MPPT by connecting the GlobalLink 520. SmartSolar Control Display The VE.Can SmartSolar charger is also equipped with a VE.Direct port like our other MPPT solar chargers. This port can be for single unit monitoring or for streetlight control. The remote on\/off connector can be externally controlled by a third-party device like a lithium battery. An optional plug-in LCD display\/control provides live-data set-up and management straight from the face of the device. Please contact your dealer for any returns repairs or support issues related to this product. Manufacturer : Victron Energy Manufacturer Part No : SCC125110412 UPC : 8719076055662.","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":53465294078291,"sku":"AC0085083","price":673.04,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/2294\/9203\/files\/8719076055662_image_1_min500.jpg?v=1778829799"},{"product_id":"5565-1","title":"SmartSolar MPPT 150\/70-Tr Solar Charger with Bluetooth","description":"SmartSolar MPPT 150\/70-Tr - A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life. The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged. By constantly monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage. The advantage of this is most noticeable when the sky is partially clouded, and light intensity is constantly changing. Remotely control and monitor the extensive features of your SmartSolar MPPT charger with built-in bluetooth by pairing it with your smartphone or other device via VictronConnect. If your installation is connected to the internet Victron Remote Management Portal (VRM) provides access to the full power of your MPPT, anytime, anywhere; both services are free to use. For remote installations - even when there is no internet connection or phone signal nearby - you may be able to monitor and control your MPPT by connecting the GlobalLink 520. By adding the SmartSolar Control Display you will be able to check the status of your Charger and battery-storage at a glance. Simply plug it into the face of your MPPT charger to provide you with real-time monitoring and set-up capabilities.","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":53465294438739,"sku":"AC0085087","price":436.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/2294\/9203\/files\/File_1ddd06ba-c07b-40bd-9856-144681eefeb8.jpg?v=1776042245"},{"product_id":"67794","title":"IVT Solar Charge Controller 12V, 24V 20A MPPTplus (200036)","description":"High-quality, modern microprocessor-controlled MPPTplus+ solar controller. Maximum efficiency in utilizing the solar power of your solar panels thanks to the MPPT (Maximum Power Point Tracker), for regulated charging of the connected solar battery. The switchable DC load output allows for direct connection of various devices to the solar charge controller. Optimal adjustment of the charging behavior to different battery types (Gel, AGM, LiFePO4) via innovative DIP switch control. The clear LCD display provides the user with comprehensive information about the current operating status. Maximum Power Point Tracker (MPPT): The most efficient operating point of the solar panels changes due to various influences, such as temperature, irradiance, and the type of solar cells. The MPP (Maximum Power Point) is continuously monitored and controlled by the solar controller's internal microprocessor to ensure the battery is charged with the highest possible current. Automatic voltage detection 12\/24 V: The solar charge controller can be used for 12 V or 24 V systems. The system voltage is detected automatically but can also be set manually. Deep discharge protection: To protect the battery from irreparable damage during deep discharge, the connected load is switched off at the load output when the discharge cut-off voltage is reached.","brand":"IVT","offers":[{"title":"Default Title","offer_id":53592402493779,"sku":"JA0143593","price":276.46,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/2294\/9203\/files\/4030072200356_image_1_min500.jpg?v=1778835134"},{"product_id":"50336","title":"Renkforce RF-4778668 - Solar Battery Protection Amorphous Solar Cell - 18V 7.5W - IP64","description":"Renkforce RF-4778668 Solar Battery Protection Amorphous Solar Cell 18V 7.5W IP64","brand":"Renkforce","offers":[{"title":"Default Title","offer_id":53951487377747,"sku":"JA0222061","price":115.67,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/2294\/9203\/files\/7e283e4de9713a9d0d8815401a8b71cd.png?v=1780916052"}],"url":"https:\/\/shopyourproduct.com\/collections\/battery-charge-controllers.oembed","provider":"Shopyourproduct","version":"1.0","type":"link"}