Skip to product information
Satel SLIM-PIR-PRO Digital Motion Detector The SLIM-PIR-PRO digital infrared detector is a modern device designed for use in advanced alarm systems (Grade 3). Part of the SLIM LINE PRO series, it features the highest quality workmanship, ensuring high intruder detection performance and stable continuous operation parameters. The detector boasts an elegant, modern design and relatively easy installation. The SLIM-PIR-PRO detector can be successfully used in virtually any intrusion detection system. It is suitable for alarm systems used in homes, shops, industrial facilities, and public buildings. Distinguishing features of the SLIM-PIR-PRO detector include a certificate of compliance with EN 50131 Grade 3 requirements: motion detection using a passive infrared (PIR) sensor, adjustable detection sensitivity, digital motion detection algorithm, digital temperature compensation, and the ability to enable/disable creep zone control. Wide-angle lens designed specifically for SLIM LINE detectors. The lens can be replaced with a curtain lens (CT-CL) or long-range lens (LR-CL). Active IR anti-masking compliant with EN 50131-2-2 for Grade 3. Detector operating parameters can be configured using the OPT-1 remote control. Built-in EOL resistors (2 x 1.1 kΩ / 2 x 4.7 kΩ / 2 x 5.6 kΩ). LED indicator for signaling. Selectable LED indicator color (7 colors available). Remote LED indicator on/off. Remote configuration mode on/off. Motion detection and power supply voltage supervision. Tamper protection against opening the housing and removing it from the surface. Adjustable mounting bracket (BRACKET D). The bracket is equipped with a tamper switch. One indicator - many colors. SLIME LINE detectors offer selectable LED indicator color. Seven colors are available for the selected version. If necessary, the indicator can be permanently turned off. Remote Configuration A major convenience for the installer is the ability to change the detector's operating parameters using the OPT-1 remote control, available in the LUNA and PRO models. This allows settings (including sensor sensitivity, operating mode, indicator light pattern, and LED illumination) to be changed conveniently without having to open the detector housing each time. SLIM LINE detectors in the PRO version feature active anti-masking using infrared radiation. This allows attempts to neutralize them by covering the lens, covering it with tape, or covering it with paint or clear varnish to be signaled. Technical Parameters Standards met: EN 50131-1, EN 50131-2-2, EN 50130-4, EN 50130-5; Relay contact resistance (anti-masking output): 26 Ω; Relay contact resistance (tamper output): 26 ; Permissible mounting height: up to 4 m ; Relay contact resistance (alarm output): 26 ; Anti-masking outputs (NC relay, resistive load): 40 mA / 24 V DC; Tamper outputs (NC relay, resistive load): 40 mA / 24 V DC; Alarm outputs (NC relay, resistive load): 40 mA / 24 V DC; Detection area: 20 mx 24 m, 90°; Security grade according to EN50131-2-2: Grade 3; Warm-up time: 30 s ; EOL resistors: 2 x 1.1 k / 2 x 4.7 k / 2 x 5.6 k ; Supply voltage ( 15%): 12 V DC ; Alarm signaling time: 2 s ; Environmental class according to EN50130-5: II ; Dimensions: 62 x 137 x 42 mm ; Maximum humidity: 93.3% ; Weight: 142 g ; Maximum current consumption: 82 mA ; Standby current consumption: 20 mA ; Recommended mounting height: 2.4 m ; Operating temperature range: -10°C..+55°C ; Detectable movement speed: 0.2..3 m/s ; Manufacturer code: SLIM-PIR-PRO .
€83,88