Skip to product information
NICE Walky 1024 ERA ONE (gate kit) The gate kit includes: . WL1024C self-locking gearmotor with built-in BLUEBUS control unit, 24V motor; OXIBD radio receiver; 2 ON2E remote controls; original packaging; Intended use: Recommended for wooden or PVC gates. Maximum gate width is 180cm, maximum gate weight is 100kg. . Ideal for gates, even on small posts (10cm wide). Smooth and precise movement also allows for automating gates with delicate structures. Key features: Walky is compatible with the OPERA and SOLEMYO systems. BLUEBUS - the system allows you to connect peripheral devices using a 2-wire cable, LEDs indicate activated functions. Fast - the gearmotor needs only 7 seconds to open or close the gate (in ideal installation conditions). Easy to install - the actuator bracket can be rotated for easier installation, even on less massive posts. Can be installed in a very narrow corner (min. 80 mm). Always working - thanks to the PS424 battery (optional), the actuators will open and close the gate, even in the event of a power outage. Intelligent - the actuator automatically remembers the gate's end positions during programming (self-learning). Safe - constant monitoring of connected devices, the lamp signals system malfunctions - the number of flashes indicates the type of error (self-diagnosis), amperometric obstacle detection system, soft start when opening and slowdown when closing. OXI, SMXI, SMXIS radio connector. BLUEBUS photocells. & xa0. Modular WLA1 control unit 4 speeds; automatic closing with delay; partial opening function; adjustable pause time; adjustable sensitivity level; automatic recognition of NO/NC/8.2 kOhm safety devices; OXI 4-Channel Indoor Radio Receiver (OPERA). The receiver's function is to convert the information contained in radio waves into electrical voltage. This allows us to automatically open our device after pressing the appropriate button on the remote control. The radio receiver ensures the correct and efficient operation of the entire system. The SM Nice Opera - OXIBD receiver from the ONE series can be programmed with FLOR/ONE/SMILO/NICEWAY/INTI/BiDi remote controls. The first programmed remote control will determine the radio path on which the receiver will operate. OXIBD receivers can be used as signal amplifiers to increase the operating range between transmitters and other NICE bidirectional receivers.; Power supply: 24V; Current: 2.0A; Sampling power: 50W; Rotation speed: 1.7-2.5 rpm; Torque: 100Nm; Intensity: 50 cycles/day; Protection class: IP44; Operating temperature: from -20°C to +50°C; Dimensions: 90 x 125 x 358 mm; Weight: 4.3kg; .
€914,96