Skip to product information
MAKITA IMPACT DRIVER 1/4" 180NM 18V LXT 5.0Ah DTD173RTJ CASE Cordless impact screwdriver / driver with 1/4" connection Makita DTD173RTJ: impact screwdriver with electronic 4-stage speed switch and 4 automatic operating modes: ; - operating mode "A" - in this mode, the tool starts screwdriving at a low speed, then switches on the impact and increases the speed until maximum speed is achieved, - operating mode "T" for thick sheet metal - special mode for optimal and fast screwdriving of self-drilling screws, - operating mode "T" for thin sheet metal - the screwdriver stops automatically after 3 impacts, - screw mode: . - when turning in reverse - stops the impact and reverse rotation within 0.2 s from the moment the screw or nut is sufficiently loosened, ; - when unscrewing - the switch trigger stroke needed to reach the maximum rotation speed is reduced to 1/3, ; it has the ability to change the operating mode using an additional switch located above the main switch, ; high torque - 180 Nm, ; it is equipped with a brushless DC motor - BLDC, ; manufactured in accordance with XPT Technology, thanks to which it has increased resistance to dust and moisture, ; it has an adjustable rotation speed, ; forward/reverse rotation and a brake, ; the impact driver has an LED light ring with 3-stage brightness adjustment, ; it has an ergonomically designed handle covered with elastomer, ; not compatible with BL1811G, BL1813G, BL1815 (18V/1.3Ah) and BL1815G (without electronics) batteries; the screwdriver is supplied with 2 batteries and a charger, packed in a MakPac system case.; TECHNICAL DATA OF THE MAKITA DTD173RTJ IMPACT DRIVER : . supply voltage : 18V, ; battery type : Li-Ion, ; supported batteries : 1.5 / 2.0 / 3.0 / 4.0 / 5.0 / 6.0 Ah, ; idle speed:- gear 1 : 0 - 1100 rpm,- gear 2 : 0 - 2100 rpm,- gear 3 : 0 - 3200 rpm,- gear 4 : 0 - 3600 rpm,; kick rate at idle:- gear 1 : 0 - 1100 /min,- gear 2 : 0 - 2600 /min,- gear 3 : 0 - 3600 /min,- gear 4 : 0 - 3800 /min,; standard screws M5 - M16,; machine screws M4 - M8,; high-tensile strength screw : M5 - M14,; maximum torque: - gear 1: 20 Nm, - gear 2: 50 Nm, - gear 3: 170 Nm, - gear 4: 180 Nm, ; tool holder: 1/4" hexagonal; sound power level: 108 dB(A); sound pressure level: 97 dB (A); noise coefficient: 3 dB (A); dimensions: 111 x 81 x 234 mm,; weight with battery: 1.2 - 1.5 kg; MAKITA DTD173RTJ IMPACT DRIVER EQUIPMENT: . 2 BL1850B (18V / 5.0Ah) 632F15-1 batteries,; DC18RC 195584-2 charger,; belt clip,; M4x12 screw,; Makpac type 2 case 821550-0,; Makpac case insert 837670-0,; user manual.; .
€467,04