Skip to product information
Before you start adding chlorine to the water, it is important to ensure the pH value of the water is between 7.2 and 7.6. If the pH value is too high, you should adjust it with pH-minus; if it is too low, use pH-plus. You must always first dissolve the pH correction agent in a bucket of lukewarm/warm water. Then, please dissolve it over the surface of the swimming pool water. Keep the pump/filter running. After approximately 2 hours, you can test again and make corrections if necessary. Contents: 80 tablets. Depending on the method of dosing, the dissolution time of the tablets may vary. In a chlorine dispenser, the dissolution time of an 8-gram tablet can be less than a day. This indication depends, among other things, on the capacity of the pump-filter system and the way in which a chlorine dispenser is placed in the swimming pool. For lowering the pH value of swimming water. For the optimal effectiveness of chlorine. 8-gram tablets each. Suitable for hard and soft water. We recommend adding chlorine to the water in the evening after swimming. Never add chlorine tablets directly to the water; use a chlorine dispenser or chlorine dosing valve. If chlorine comes into direct contact with the pool, the pool liner may discolour.
€33,99