Skip to product information
Product information "Shelly DIN rail "Wave Pro Shutter" relay roller shutter actuator Z-Wave" Professional DIN rail Z-Wave shutter control with power measurement, 16 A per channel. For home and building automation with remote control of motorized shutters, roller shutters, blinds, or awnings. Can be mounted on a DIN rail in a fuse box. It is recommended to use only motors with electronic or mechanical limit switches. Controls the tilt position (angle) of the blind slats. Supports push buttons/momentary switches and toggle switches. Power measurement. Extremely low power consumption: 0.3 W. Z-Wave frequency band: 868.4 MHz (CEPT countries). Latest technology: Z-Wave 800 series. Automatic setup with SmartStart Security 2 Authenticated for the highest level of security. Supports over-the-air firmware updates. Works with Z-Wave certified gateways and over 4,000 Z-Wave devices. A gateway (Smart Hub) is not included but is required for device configuration. WHY CHOOSE THE WAVE PRO SHUTTER? The best solution for new residential and commercial buildings. The Wave Pro Shutter is a relay that supports up to 16 A per channel. It is equipped with an integrated electricity meter, allowing you to control and monitor the consumption of each channel. Various actions, scenarios, and schedules can be set to align your environment with your daily activities or business needs. INTRODUCTION TO Z-WAVE. Shelly Qubino works with Z-Wave. By using Z-Wave, smart home products can communicate seamlessly with each other thanks to a central Smart Hub – regardless of their brand or platform! Shelly Qubino devices use the latest generation of Z-Wave chips (S800), one of the world's most popular standardized technologies for smart homes. Z-Wave devices must meet certain requirements to function correctly. This includes, for example, using a supported Z-Wave hub. For more information, please visit the official Z-Wave website: www.z-wave.com. Works with any Z-Wave gateway. The Wave Pro series is designed for DIN rail installation in the fuse box. Once installed, you can integrate it into your Z-Wave network (a Z-Wave gateway is required) and control connected devices from anywhere using your smartphone or tablet. Shelly Qubino devices work with over 4,000 Z-Wave certified devices and gateways. MAXIMUM SAFETY Wave Pro Series. The Wave Pro series is equipped with overheating, overcurrent, and overvoltage protection and is installed in the fuse box (DIN). The Pro series enables complete smart automation without additional cables or wiring and is perfect for homes, offices, shops, businesses, and manufacturing facilities, as well as new builds. Overcurrent and overvoltage protection features are only available for devices with current sensing. Z-Wave Controlled Features: Integrate the Wave Pro Shutter into your Z-Wave network and control it remotely. It is compatible with all certified Z-Wave gateways. Slat Angle Control: Use the Wave Pro Shutter with your blinds and control the slat tilt (angle) to regulate the amount of light in the room. Position Control: Set the desired position of your blinds, shutters, shades, awnings, and other devices powered by bidirectional AC motors. Associations: Establish direct communication between devices on your local Z-Wave network and set custom actions, even without a hub! Smart Schedules? Create custom schedules based on your daily routine or aligned with sunrise and sunset (gateway required). Smart Scenes: Combine the Wave Pro Shutter with other Z-Wave devices (gateway required) and define custom scenes. Technical Data Power supply: 110-240 V AC, 50/60 Hz Device power consumption: 0.3 W Power measurement (W): Yes Max. switching voltage AC: 240 V Max. switching current AC: 16 A per channel Overheating protection: Yes Overload protection: Yes Overvoltage protection: Yes Range: Up to 40 m indoors (depending on local conditions) Z-Wave repeater: Yes CPU: Z-Wave S800 Z-Wave frequency bands: 868.4 MHz Maximum transmitted radio frequency power in frequency band(s): 25 mW Size (H x W x D): 94 x 19 x 69 x 0.5 mm / 3.7 x 0.75 x 2.71 x 0.02 in Weight: 75 g Mounting: DIN rail Screw terminals Max. torque: 0.4 Nm / 3.5 lbin Conductor cross-section: 0.5 to 2.5 mm² / 20 to 14 AWG (green terminals) 0.5 to 1.5 mm² / 20 to 16 AWG (white terminals) Stripped conductor length: 6 to 7 mm / 0.24 to 0.28 in (green terminals) 5 to 6 mm / 0.20 to 0.24 in (white terminals) Housing material: Plastic Color: Black Ambient temperature: -20 °C to 40 °C Humidity: 30% to 70% relative humidity Max. altitude: 2000 m.
€112,67