Skip to product information
Roger MCT88M-IO Proximity Reader Product code: MCT88M-IO. . The MCT88M-IO is an indoor proximity reader designed for use in the RACS 5 access control system. The terminal features a color graphical display, touch keypad, and 4 function buttons. The MCT88M-IO supports proximity transponders compliant with ISO/IEC14443A, i.e. MIFARE Ultralight, Classic, Desfire EV1, and Plus. Additionally, NFC and Bluetooth (BLE) identification are also supported - available to smartphone users with the Roger Mobile Key application installed. The MCT88M-IO version additionally has 3 NO/NC inputs, two transistor outputs with a load capacity of 15V DC/150mA, and one relay output with a load capacity of 30V DC/1.5A. Selected features: . Access terminal for the RACS 5 system; 13.56 MHz MIFARE Ultralight, Classic, Desfire EV1 and Plus proximity reader; NFC, Bluetooth (BLE) - mobile identification via smartphone (installation of Roger Mobile Key mobile application required); Color graphic display; Numeric touch keypad with backlight; 4 function keys; 3 signaling indicators (LEDs); Tamper sensor (Tamper); RS-485, Ethernet (LAN) interface; Technical data: . Supply voltage Nominal 12VDC, permissible 10-15VDC; Current consumption (average) 110mA; Inputs Three parametric inputs (IN1.IN3) electrically connected internally to the power supply plus through a 5.6 kΩ resistor. For NO and NC type lines, the trigger threshold is approx. 3.5V; Relay outputs One REL1 relay output with one isolated NO/NC contact, max. load 30V/1.5A; Transistor outputs Two transistor outputs (OUT1, OUT2) open collector type, max. load 15VDC/150mA; Anti-tamper protection Housing opening reported software to the access controller; Proximity reader ; ISO/IEC14443A MIFARE Ultralight, Classic, Desfire EV1 and Plus cards; Mobile devices (Android, iOS) compliant with NFC; Mobile devices (Android, iOS) compliant with BLE (Bluetooth Low Energy) v4.1; Reading distance for MIFARE and NFC cards up to 7cm; Reading distance for BLE - depends on environmental conditions and the model of a given mobile device. The terminal's radio signal strength can be increased as part of the low-level configuration.; Distances Up to 1200m for RS485 between the controller and the expander; Selected features ; The reader has 4 touch function keys; Color graphic display; Recommended for RACS 5 systems as a Time and Attendance terminal (T&A); Possibility of connection via Ethernet to a virtual access controller or via RS-485 to the MC16 controller bus; Protection class IP41; Environmental class (according to EN 50133-1) Class I; Operating temperature +5°C - +40°C; Humidity 10..95% (no condensation); Dimensions H x W x D 85 x 155.5 x 21.5mm; Weight 190g; Note: the reader does not work autonomously.
€430,53