Skip to product information
TP-Link SG2005P-PD Smart Switch, 5 Gigabit Ports, PoE++ Input, PoE+ Output. The TP-Link TL-SG2005P-PD switch is the ultimate solution for expanding and optimizing your network efficiently and reliably. Designed for challenging environments, this switch offers a powerful combination of PoE technology, robust durability, and advanced management features. With standard PoE Passthrough technology, the TL-SG2005P-PD doubles the transmission distance from the source to the device from 100 m (328 ft) to 200 m (656 ft), maintaining gigabit speeds. Ideal for long-range surveillance cameras and access points, this switch ensures extended coverage without compromising performance. Equipped with one Gigabit PoE++ input port and four PoE+ output ports, the TL-SG2005P-PD supports up to 64W / 44W / 19W / 6W of PoE budget, depending on the power supply (802.3bt Type 4, 802.3bt Type 3, 802.3at and 802.3af PoE, respectively). This flexibility ensures that all your devices receive the power they need to operate efficiently. The TL-SG2005P-PD is easy to mount on a wall or pole using the supplied mounting kits, allowing for quick and adaptable installation to suit your specific needs. Whatever the scenario, this switch offers the flexibility needed for efficient deployment. In addition to its robustness and range, the TL-SG2005P-PD includes value-added features such as static routing, access control list (ACL), QoS and VLAN, promoting an optimized, secure and high-quality network experience. Choose the TP-Link TL-SG2005P-PD Switch and take your network to a new level of performance and reliability. Features of the TP-Link 5-Port Gigabit Smart Switch: PoE++ Input Port, PoE+ Output Ports - Brand: TP-Link - Model: TL-SG2005P-PD Specifications of the TP-Link 5-Port Gigabit Smart Switch TL-SG2005P-PD Hardware - Standards and Protocols: IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3af, IEEE 802.3at, IEEE 802.3bt, IEEE 802.3x, IEEE 802.1d, IEEE 802.1s, IEEE 802.1w, IEEE 802.1q, IEEE 802.1p, IEEE 802.1x - Interface: 1 x 10/100/1000 Mbps Input RJ45 PoE Port (compatible with 802.3af/at/bt); 4x 10/100/1000 Mbps PoE Output RJ45 Ports (PoE 802.3af/at compatible) - Network Media: 10BASE-T: Category 3, 4, 5 UTP cable (maximum 100m); 100BASE-TX/1000Base-T: Category 5, 5e or higher UTP cable (maximum 100m) - Power Supply: Obtain power from an 802.3af/at/bt PoE source - Maximum power consumption: 71.5 W (when powered by 802.3bt Type 4 (90 W)) - Maximum heat dissipation: 243.99 BTU/hr (when powered by 802.3bt Type 4 (90 W)) - Dimensions (WxDxH): 100 x 38.5 x 170 mm PoE Ports (RJ45) - Input PoE Port: Port 5, 802.3af/at/bt compatible - Output PoE Ports: Ports 1-4, 802.3af/at PoE compatible PoE Power Budget: - 64 W when powered by 802.3bt Type 4 (90 W) - 44 W when powered by 802.3bt Type 3 (60 W) - 19 W when powered by 802.3at - 6 W when powered by 802.3af Performance - Switching capacity: 10 Gbps - Packet forwarding rate: 7.44 Mpps - MAC address table: 8k - Packet buffer memory: 4.1 Mbit - Jumbo frame: 9 KB QoS - 802.1p CoS/DSCP priority - 8 priority queues - Priority scheduling mode - SP (Strict Priority) - WRR (Weighted Round Robin) - Queue weight configuration - Bandwidth control - Port/flow-based rate limiting - Smoother performance - Storm control - Multiple control modes (kbps/ratio) - Broadcast/Multicast/Unicast control (unknown) L2 and L2+ Features - 32 IP Interfaces - IPv4/IPv6 Interface Support - Static Routing - 32 IPv4/IPv6 Static Routes - DHCP Server - DHCP Relay - DHCP Interface Relay - DHCP VLAN Relay - L2 DHCP Relay - Static ARP - Proxy ARP - Free ARP - Link Aggregation - Static Link Aggregation - LACP 802.3ad - Up to 8 aggregation groups and up to 8 ports per group - Spanning Tree Protocol (STP) - STP 802.1D - RSTP 802.1w - MSTP 802.1s - STP Security: TC Protection, BPDU Filter/Protection, Root Protection - Loopback Detection - Flow Control - 802.3x Flow Control - Mirroring - Port Mirroring - CPU Mirroring - One-to-One - Many-to-One - Flow-Based - Ingress/Egress/Both - Device Link Detection Protocol (DLDP) - LLDP/LLDP-MED 802.1ab L2 Multicast - 511 shared multicast groups IPv4, IPv6 - IGMP Snooping - IGMP v1/v2/v3 Snooping - Fast Leave - IGMP Snooping Querier - Static Group Configuration - Multicast VLAN Registration (MVR) - Multicast Filtering - MLD Snooping - MLD v1/v2 Snooping - Fast Leave - MLD Snooping Querier - Static Group Configuration - Limited IP Multicast (256 profiles and 16 entries per profile) Characteristic.
€140,23